Sometimes when i watch a movie in 1080p and SABNZB is downloading and extracting the NAS is running to its max. for this reason i bought another memory.
When i want to replace the memory some things need to be done first.
This is the NAS where Talking about
When we took it all appart it looks likes this
First of al we need to take of the front cover and the Hard drives. Remember the which drive was in which bay. This wil spare you a lot of errors and difficulties.
The second step is to remove the screws which are surrounded bye red circles
When we have done that you need to press the back with the logo so the little lips fall over the metal bar inside of the NAS.
When the lips are over the bar you are able to slide out the interior of the NAS. Be very careful that you don't damage anything
When the NAS and the outside are apart you need to get the screws loose which are withing the red circles.
you can now remove the brackets of the hard drives.
When you have done that it will look like the picture below
When you have done this you need to remove the remaining screws on the top plat which is on top of the motherboard. After this you are able to spin the motherboard and you can change the memory on the Motherboard.
If you need any advise or help with this please leave me a comment. Ok when you have done this you can put everything back together and don't forget to put all the screws back in place again :).
After you put the NAS back together you can connect you NAS again and you can test if everything is working again.
Good luck.
Geen opmerkingen:
Een reactie posten